Impactapost ground anchor system

Impactapost™ - Installation

- in just two minutes!

The Impactapost anchor is driven and set into the ground within one minute and the post is locked into position within another minute.

Requires one person
Takes two minutes
No digging or concreting
Safe

Take the hole out of the post hole! Impactapost is the post-anchoring system that eliminates the need to dig and concrete. This unique system has been designed to save you time and money without comprising strength.

Installation Instructions - using power hammer:

1. Lay the Impactapost, power hammer and assembled adaptor (available from distributors at nominal charge) on the ground with the tip of the Impactapost at the point of installation.

2. Raise the assembly to vertical and insert the Impactapost to around one third deep.

3. With the power hammer at rest, check for vertical with the top level at two 90 degree points. When satisfied that the Impactapost is vertical, complete installation can proceed.

4. Drop the post onto the Impactapost, set the Impactapost collar, ram home with the Impactapost slide hammer.


	Using a power hammer, the metal anchor is driven directly into the ground.			Using a slide hammer, the post is connected to the anchor using the unique patented metal fastening system.